Product Description
NOTES:
- There are currently no accurate photos of this lift kit in blue or red. The photos above are to show the general look and appearance of the machine after the lift has been installed.
- To determine what size of hardware you have, you figure out which socket is used to remove the center bolt holding the radius to the frame. For 10mm hardware, you will use a 15mm socket and for 12mm hardware, you will use a 18mm socket.
- Trailing arms are NOT included.
Applicability: 2019-21 Polaris RZR XP 1000 / RZR XP Turbo / RZR XP 4 1000 / RZR XP 4 Turbo
- There are currently no accurate photos of this lift kit in blue or red. The photos above are to show the general look and appearance of the machine after the lift has been installed.
- To determine what size of hardware you have, you figure out which socket is used to remove the center bolt holding the radius to the frame. For 10mm hardware, you will use a 15mm socket and for 12mm hardware, you will use a 18mm socket.
- Trailing arms are NOT included.
Applicability: 2019-21 Polaris RZR XP 1000 / RZR XP Turbo / RZR XP 4 1000 / RZR XP 4 Turbo
Big Lift Features:
RCV Axle Features:
- Heavy duty laser cut rear upper lift/shock relocation brackets
- Increases ground clearance
- Makes room for larger tires
- Bolt-on application
- Kit includes:
- (4) custom heavy-duty max clearance control arms crafted from 1 1/4"x.120 wall DOM tubing
- Heavy duty support gussets
- Shock mounts
- Full set of custom heavy duty max clearance radius bars with spherical bearings
- Front and rear heavy duty High Lifter springs
- (4) custom Outlaw RCV axles
- Additional brake line
- Steering stops
- All required hardware
- Detailed instructions with step-by-step photos
- Available in Black, Red or Blue
RCV Axle Features:
- Built and assembled in the USA
- Uses the RCV Performance patented cage
- Sliding bars on both ends for increased angle capability
- Bars, housings, cages, and races made of high strength alloy steel
- Well established and proven design
