Product Description
Applicability:
- 2013-2015 Polaris Ranger XP900 and 900 Crew (PLK900R-50)
- 2015-2019 Polaris Ranger Diesel and Crew Diesel (PLK900R-50)
- 2015 Polaris Ranger Full-Size 570 and 570 Crew (PLK900R-50)
- 2016 Polaris Ranger XP900, Crew XP900-5, and Crew XP900-6 (PLK900R-50)
- 2016 Polaris Ranger XP570 and Crew XP570-6 (PLK900R-50)
- 2017-2019 Polaris Ranger XP900 and Crew XP900 (PLK900R-50)
- 2017 Polaris Ranger XP1000, Crew XP1000 (PLK900R-50)
- 2017 Polaris Ranger XP1000 NorthStar (PLK1000R-50)
- 2017-2018 Polaris Ranger Crew XP1000 NorthStar (PLK1000R-50)
- 2018 Polaris Ranger Crew XP1000 (PLK900R-50)
PLK900R-50 Features:
- Front and rear lift
- Bolt-on application, takes approximately 1-2 hours to install
- High Lifter logo precision laser cut into each kit
- Clear-coated High Lifter name plate
- Zinc plating or powder coat finishes for long life in rugged conditions
- All installation hardware included
- Detailed step by step photo instructions
- High Lifter lifetime warranty
- Contains alignment cones for 10mm bolts for use with factory tie rod / rod ends and OEM bolts if upgraded to Pro Series Tie Rod / Rack End kit
- 1.5 inch spacers are required in the rear if you are running factory Polaris Ranger 900 steel wheels
- If there is an electric bed lift installed, it will require you to slightly modify the lift brackets to achieve proper clearance to allow the bed lift to function properly
- 4" lift kit
- Front and rear lift
- Bolt-on application
- Relocates shock mounts and tightens suspension
- Zinc plating for long life in rugged conditions
- All installation hardware included
- Detailed step by step photo instructions
- High Lifter lifetime warranty
Prop 65 Warning: Product may contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
