Product Description
One Cart. One Complete KFI Plow System for Your Kawasaki Teryx KRX.
Skip the guesswork of matching plow parts. This complete KFI plow system starts with the KFI #106295 mount built for your Kawasaki Teryx KRX — then use the dropdowns above to add your push tube, pick your blade, and bolt on optional accessories. One add-to-cart, everything arrives ready to work together.
What’s Included
- KFI #106295 plow mount — included in the base price, machine-specific fit
- Push tube — UTV Pro 2.0 Push Tube #106300 (+$308.99), or skip it if you already own one
- Plow blade — your choice of KFI Pro-Series steel or poly blades from $392.99
- Optional: Plow Skid Kit (+$51.99)
- Optional: Replacement Wear Bars (2pc) (+$46.99)
Fitment
| Machine | Years |
|---|---|
| Kawasaki Teryx KRX 1000 (all) | 2020–2026 |
| Kawasaki Teryx KRX 4 1000 (all) | 2023–2026 |
Not sure it fits your machine? Email info@utvpartsandaccessories.com with your year, make and model and we’ll confirm before you order — or call 800-596-0785.
Optional Add-Ons, Explained
Every option in the dropdowns above is a real KFI part. Here’s what each one is and why you’d add it:
Plow Skid Kit (#105170)
A pair of replaceable skid feet that bolt to the back of the blade and set your blade’s ride height, so the cutting edge floats just above gravel, pavers or lawn instead of digging in. Includes two zinc-plated skids with ½″ Grade 50 steel pads (0.63″ diameter shaft, 6.5″ long) and all mounting hardware. Fits the Pro-S steel and Pro-Poly blades offered above — the cheapest insurance you can buy for a new plow and a gravel driveway.
Replacement Wear Bars (2pc)
The wear bar is the sacrificial scraping edge along the bottom of the blade — it takes the abuse so the blade itself never touches the ground. This 2-piece replacement set (with hardware) keeps a fresh edge on hand; when the installed bar wears down, swap it in minutes instead of grinding into your blade.
Plow Roller Kit (#105270 Standard / #105465 Wide — steel cable; #106745 for synthetic rope)
Plowing works your winch cable hard — hundreds of short lifts per session over a small fairlead roller. The KFI plow roller replaces your winch’s fairlead for the season with a large 2-1/8″ curved-groove roller (vs. the standard 7/8″) that reduces cable flattening and kinking, the top causes of snapped steel cables. Choose Standard or Wide to match your winch’s fairlead bolt pattern. Running synthetic rope? Choose the Quick Plow Pulley #106745 instead — KFI’s current synthetic-rope solution.
Flag Markers — Pro-S (#105640)
A pair of 15.5″ blaze-orange marker flags with steel 89°-angled bases that bolt to the ends of a Pro-S steel blade (M6 hardware included). They show you exactly where your blade corners are — in deep snow, at night, and next to cars, mailboxes and garage door frames. Fits steel blades only.
Flag Markers — Pro-Poly (#105810)
The same corner-visibility insurance for Pro-Poly blades: two 19.5″ markers with straight bases sized for the poly blade’s mounting points, M6 hardware included. Fits poly blades only — will not mount to the Pro-S steel blade.
Plow Strap (#106100)
Swap your winch’s steel or synthetic line for this 1.25″ heavy-duty strap (64″ long) during plow season. It uses your existing winch hook, maximizes pulling capacity, and eliminates the cable stacking and binding that chews up winches in stop-and-go plow duty. Built-in safety feature: at roughly 3,200 lb the stitching gives way before your winch does — a $33 strap sacrifices itself instead of a $400 winch.
Plow Strap Roller (#106140)
The companion piece to the Plow Strap: a tapered two-piece UHMW roller that mounts to your push tube (fits Pro 2.0 #106300, older #105635 UTV tubes and ATV #105000 tubes) and keeps the strap centered through every lift, with multiple mounting positions for different cable angles. Hardware included. For use with the Plow Strap #106100 only.
Power Angle Package (ACT203 + brackets + harness + remote)
Angle the blade left and right from the driver’s seat — no more climbing out to swing the plow. The KFI ACT203 is a 12-volt electric-over-hydraulic actuator built specifically for KFI UTV push tubes, and this package includes everything needed to run it on the Pro 2.0 tube: the ACT203 actuator, actuator brackets #106305, wire harness #106940 and the hand remote control kit #106950. One option, one working power-angle setup out of the box.
Want a second set of eyes on your build before you order?
Call 800-596-0785
Frequently Asked Questions
Will this plow system fit my machine?
This system is built around the KFI #106295 plow mount, which fits the machines listed in the fitment table above. Not sure it fits your machine? Email info@utvpartsandaccessories.com with your year, make and model and we’ll confirm before you order — or call 800-596-0785.
Is shipping free?
Yes — most of what we sell ships free to the lower 48 states. Orders under $150 have a flat $14.99 shipping fee. Alaska and Canada shipments incur additional freight charges, and international shipping is available — we quote it individually so you get the best rate. Questions? Email info@utvpartsandaccessories.com or call 800-596-0785.
Can I ask questions before I order?
Email info@utvpartsandaccessories.com and we’ll usually reply same business day — or call 800-596-0785 (M-F 11AM-4PM CST) if you’d rather talk to a real person who lives in the USA.
Do you offer installation help?
Email info@utvpartsandaccessories.com or call 800-596-0785 — our team can walk you through the majority of product and installation questions, and if we can’t answer something ourselves, we know how to get the answer and will make sure you’re taken care of.
