Denali Standard Series for CFMoto UForce and ZForce

Product Description

Denali Standard Series for CFMoto UForce and ZForce

DENALI UTV Snow Plows are made to handle the toughest conditions and hold up against sand, snow and ice. With a 65 degree attack angle and over center design, the heavy duty plow blade ensures snow rolls up and is thrown forward. The central mounting position of the plow kit disperses the force of impact to the sturdiest part of the UTV / SxS, preventing damage to the front end or other vehicle parts from sudden impact. Our easy-connect design makes for a quick attachment of the plow to your UTV for when the snow begins to fly. Then, when winter draws to a close, take the plow back off in a matter of minutes. The durable snowplow mount plate is specifically engineered to fit the frame of your UTV and can remain on your vehicle year round.

Please Note: All of our DENALI Plow Systems require a winch (not included) to raise and lower the plow blade. We recommend our VIPER Elite, VIPER Max, or VIPER Midnight winches.

Kit Contents:

• UTV Snow Plow Blade - (Choose width above)

• Pushtubes (Choose Length above)

• Custom Plow Mount (Choose from Fitment Chart in Drop Down Menu)

• Installation Hardware and Instructions

Blade Features:

• Snow Plow Blade (19 inches scoop) and leading horizontal supports are formed from a single piece of 11 gauge steel

• Four 7 gauge ribs run the full height of the blade

• Three additional 7 gauge horizontal stabilizers support the deepest point of the blade

• 65° attack angle and over center design ensures snow rolls up and is thrown forward

• Replaceable 7gauge steel wear bar included with every kit

• Height and angle adjustable skid feet included

• 3 Year Warranty

Pushtube Features:

• Impact Resistant Reinforced Pivot Assembly - 2 additional support bars for maximum durability & strength

• Turn system allows you to easily position your plow in 10 different angles - 0, 12.5°, 25°

• Simple detachment system with the pull of a pin

• Structural tube steel cross bar for added lateral rigidity

• Quick Release Pins included

• 13.5 inches center to center for plow mount tabs

• Extended Push Tubes are designed to be used with SxS/UTVs that have tracks

Pushtube Lift Kits:

• Pushtube Lift Kits bolt directly to the pushtubes, providing 2 or 4 inches of lift

• Pushtube Lift Kits allow plow installation on machines with skid plates, 13”-15” and 15”-17” off the ground

• Lift Kits are for use with DENALI UTV Standard Pushtubes only (NOT Extended Pushtubes)

Optional Hydroturn Features:

• PLEASE NOTE: Extended Pushtubes is not compatible with the Hydraulic Lift System

• Hydraulic system is completely sealed for life, no need to purchase hydraulic fluid, bleed lines, maintain a reservoir level or change the fluid

• Change the blade angle while driving; full radius turn in just 5 seconds

• Heavy duty chrome plated ¾″ cylinder shaft

• No modifications necessary - bolts directly to the Denali UTV Plow Push Tubes

• Wire harness utilizes weatherproof connectors

Optional Plow Pulley Fairlead Features:

• Roller

•      Replaces the winch fairlead during the plow season

•      For use with Steel AND Synthetic cables

•      Curved cable groove helps eliminate flattening and breaking of cable

•      Bolt Patterns:

•         Standard Spool: 3″ x 4.875″

•         Wide Spool: 3″ x 6.67″

• Sheave

•      Includes pulley, 1/4″ clevis hook and nylon strap

•      Allows greater precision when raising/lowering plow blade and increases the angle of pull

• Cable

•      12′ length, 1/4″ diameter

•      Single braid, dyneema rope with galvanized steel thimble/eyelet

Fitment Chart

MA11763
2021-2023 CF Moto U-Force 600

MA11765

• 2016-2020 CF Moto U-Force 500
• 2013-2023 CF Moto U-Force 800

MA11766

• 2019-2020 CF Moto U-Force 1000

MA11767

• 2016-2023 CF Moto Z-Force 500
• 2014-2023 CF Moto Z-Force 800/800EX
• 2018-2019 CF Moto Z-Force 1000

MA11768

• 2021 CF Moto U-Force 1000
• Note: does NOT work with 2022 CF Moto U-Force 1000

MA11768A:

• 2022-2023 CF Moto U-Force 1000

MA11769

• 2021 CF Moto Z-Force 950

Frequently Asked Questions

Will this fit my machine?
The fitment details on this page list every machine the Denali Standard Series for CFMoto UForce and ZForce works with. If you're not 100% sure about your year and model, email info@utvpartsandaccessories.com or call 800-596-0785 before ordering — we'll confirm your exact fit in two minutes.

Is shipping free?
Yes — most of what we sell ships free to the lower 48 states. Orders under $150 have a flat $14.99 shipping fee. Alaska and Canada shipments incur additional freight charges, and international shipping is available — we quote it individually so you get the best rate. Questions? Email info@utvpartsandaccessories.com or call 800-596-0785.

Can I order over the phone?
Email info@utvpartsandaccessories.com and we'll usually reply same business day — or call 800-596-0785 (M-F 11AM-4PM CST) if you'd rather talk to a real person who lives in the USA.

What if I need help with installation?
Email info@utvpartsandaccessories.com or call 800-596-0785 — our team can walk you through the majority of product and installation questions, and if we can't answer something ourselves, we know how to get the answer and will make sure you're taken care of.