Product Description
Can-Am Maverick Trail Front Brush Guard with Winch Mount
Fits:
- 2018-2021 Can-Am Maverick Trail (50" wide model)
- 2019-2021 Maverick Sport
Features:
- Mounts to the stock front tubes.
- Allows you to mount a winch up high out of the water and mud.
- Made from 11 ga. American steel.
- Accepts standard center spool winches with a 4.875” wide x 3” deep bolt pattern; will not accept wide spool winches.
- Powder-coated texture black.
- Laser Cut and CNC formed to insure a perfect fit.
- Made in the USA.
Now, you can mount a winch up high out of the mud and water and protect the front of your Maverick Trail. You must use a regular spool winch with a 4.875” wide x 3” deep bolt pattern. This part in laser cut and CNC formed from American Steel insuring a perfect fit. It is powder coated with a texture black to match your stock buggy’s coating. It installs in less than an hour. If you do not want to add a winch on top you can still mount a winch below the brush guard in the stock location.
The manufacturer reserves the right to make modifications/improvements to their products at any time. Vehicles may have changes throughout the year. Therefore, pictures are a representation of the product you will be getting but may vary due to product revisions.
Prop 65 Warning: Product may contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Product Videos
Custom Field
Product Reviews
1 Review Hide Reviews Show Reviews
-
ADJUSTABILITY
Bumper is very well-made. Actually looks really nice and the machine doesn’t look big and clunky. BUT I really wish it was a little bit more adjustable height wise. Right now the very tips on the far left and right actually stick up almost into my headlight beams. Tried it last night in the dark and there’s shadows in front of my tires from the bumper but not out far. Getting LED bulbs this weekend then I’ll see how it looks. I have it mounted as low as it can go according to the cut outs on the top Of the bumper where the factory rollbars set. It would be really nice if they either made the holes a half inch wider towards the inside. So it could be Attached a little lower on the frame! Or change the angle that the far left and right and bend up and make it a little straighter. So it does not interfere with my headlights. I have looked at numerous pictures and they all appear to be the same as mine for this particular model. Did notice that other models of Can-Am and other brands do not have this issue. It would be nice if they would Correct this since it does have a small amount of interference with my headlight beams up close. Otherwise very satisfied with the bumper durability and quality.
