Product Description
✔ Ships FREE to the lower 48 · ✔ 360° adjustable vents · ✔ Designed & supported in Minnesota, USA
Kawasaki Mule Pro FXT / FX / FXD Under Hood (2015-2025) Ice Crusher Heater
Are frosted windshields and bone-chilling seats stealing joy from your outdoor activities? Ice Crusher UTV Heaters has you covered! All Ice Crusher Heater Kits are developed with the average Do-It-Yourselfer in mind.
This kit includes all hardware, fittings, hoses, and specialty tools. Picture-rich instructions will guide you step-by-step through installation. With adjustable vents and a high CFM blower, you'll find ample heat to defrost the windshield and heat up your hands and feet.
You'll never be stranded during installation because our Minnesota-based technical support team is ready to help! Put the fun back in your outdoor activities with an Ice Crusher UTV Heater.
UTV Cab Heater Fitment:
| 2025 Mule Pro FXT / FX / FXD | 2024 Mule Pro FXT / FX / FXD | 2023 Mule Pro FXT / FX /FXD | 2022 Mule Pro FXT / FX / FXD | 2021 Mule Pro FXT / FX / FXD |
| 2020 Mule Pro FXT / FX /FXD | 2019 Mule Pro FXT / FX / FXD | 2018 Mule Pro FXT / FX / FXD | 2017 Mule Pro FXT / FX / FXD | 2016 Mule Pro FXT / FX / FXD |
| 2015 Mule Pro FXT / FX / FXD |
Heater Features:
- 14,600 BTU output
- CFM: 180
- Heater unit dimensions (10 x 7.5 x 4.5)
- Mounts on the passenger side under hood
- Vents: 6
- Defrost: Yes
- Get 10 to 15 degrees more heat with the addition of the MaxStat
FX Or FXT And MaxStat Options:
FX Or FXT And MaxStat Options: Add an additional 10-15 degrees of heat output to your heater with a MaxStat. New in 2024, the MaxStat has been redesigned to eliminate the use of an o-ring for sealing and instead relies on advanced thread sealants that make a perfect seal while offering replacement of the thermostat if needed. The MaxStat, inline thermostat, prioritizes hot coolant to the heater core while maintaining optimal engine temp.
- MaxStat Size: 1 1/8" (28mm)
Hose Clamp Off Pliers Option:
Make your heater install faster and easier with Ice Crusher Hose Clamp Off Pliers. These clamp off pliers will keep coolant from pouring out of your vehicle when tying into the coolant system. They also keep the majority of air from entering the coolant system dramatically reducing the effort required to remove air bubbles later. It will fit all ATV and UTV applications and great to use on radiator hoses. Kits are sold in a pair.
- It seals-off flexible hoses up to 2" inch in diameter
- 10" in overall length
- Dimensions 12.5 x 3.5 x 1 inches
Heater FAQ and Videos
International Shipments Including Canada
Free shipping does not apply to International shipments, including Canada. Canadian shipments incur a $30/heater or $50/heater freight charge depending on the province. This charge does not include Duties, Taxes, Brokerage, or other associated cross-border fees. These charges are the responsibility of the receiving party.
Frequently Asked Questions
Will this heater fit my Kawasaki Mule Pro FXT / FX / FXD Under Hood (2015-2025)?
This kit is purpose-built for the Kawasaki Mule Pro FXT / FX / FXD Under Hood (2015-2025). Check the fitment details above, and if you're unsure, call 800-596-0785 before ordering — we'll confirm your exact year and model.
How does an Ice Crusher heater work?
It taps into your machine's engine cooling system — hot coolant runs through the heater core and a quiet fan pushes real heat into the cab. No propane, no batteries to drain.
What does the MaxStat option do?
The MaxStat is Ice Crusher's inline coolant bypass thermostat. It raises coolant temperature to the heater, delivering roughly 10-15 degrees more heat output — worth it if you ride in serious cold.
Is shipping free?
Yes — most of what we sell ships free to the lower 48 states. Orders under $150 have a flat $9.99 shipping fee. Alaska and Canada shipments incur additional freight charges, and international shipping is available — we quote it individually so you get the best rate. Questions? Call 800-596-0785.
Not sure which heater fits your machine?
Call 800-596-0785 — our Ice Crusher specialists know these kits inside out and will match you to the right heater in two minutes.
Product Videos
Custom Field
Product Reviews
1 Review Hide Reviews Show Reviews
-
Nice and toasty
Nice unit. Install this unit on my ProDXT. All necessary parts are supplied, as well as cutout saws. Templates worked great. The only issue I encountered was air in the core. Even after flushing according to instructions. Quick fix is to get engine up to temp, with thermostat open. Then park down hill on a steep incline, then uphill, and downhill again. This will push air out of unit. Heats great.
